[cisco-voip] VoLTE and Unknown or Restriced Caller ID

[Brian Meade]

Since you're using MGCP, it should be pretty easy to set this on each PRI
by Setting "Calling Party IE number type unknown" to "National" and Calling
Numbering Plan to "ISDN":

[image: Inline image 1]

You can also set "Calling Party Number Type" and "Calling Party Numbering
Plan" on your route patterns or route list configurations.  This method
won't require resetting your PRIs.



On Thu, Aug 25, 2016 at 5:22 PM, Brian Meade <bmeade90 at vt.edu> wrote:

> Yea, VoLTE requires actually setting the calling number plan/type in the
> ISDN messages.  You'll need to make sure you're set to ISDN/National and
> sending 10 digits for outbound calls.
>
> On Thu, Aug 25, 2016 at 5:13 PM, Sam Jones <jonesamu at isu.edu> wrote:
>
>> Anyone experienced an issue with Caller ID displaying Unknown or
>> Restricted to a VoLTE enabled cell phone.  Calls only from the Call Manager
>> side get a Unknown or Restricted Caller ID.  Calls from our Legacy PBX
>> display fine on the VoLTE enabled cell phone.
>>
>> CUCM 10.5 -> MGCP -> Voice Gateway -> PRI -> PSTN
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160825/63cf4562/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 16802 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160825/63cf4562/attachment.png>