[cisco-voip] MCS Series Boot Looping?

[Ben Amick]

So I have the curious issue with my MCS series servers - but only the ones running CUCM 9.1 (originally installed with 8.5)
It seems every time I completely power them off and back on again, they boot up, boot to the linux shell, start kicking off the services, and once about half of the services are up, it boot loops and starts all over again.

The strange part is this only happens 2-3 times, and then its back to being solid gold. Had TAC analyze the system after the last time and they found no faults on anything, so I have no idea what happened.

Anyone else have any idea?

Ben Amick
Telecom Analyst



Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161217/8f9d960c/attachment.html>