[cisco-voip] UCS Disk Partition for C series

Matthew Collins mcollins at block.co.uk
Fri Jan 8 09:25:32 EST 2016


Hi Andy,

For the raid configuration you will need to look up your TRC and configure raid accordingly.  http://docwiki.cisco.com/wiki/UC_Virtualization_Supported_Hardware

Regards

Matthew Collins 


-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andy
Sent: 08 January 2016 13:41
To: cisco-voip voip list <cisco-voip at puck.nether.net>
Subject: [cisco-voip] UCS Disk Partition for C series

Hi,
I’ve just had some C240 m3 servers delivered for an upgrade, but there isn’t any partitioning or software pre installed, which is not necessarily and issue as the upgrade software should be available via PUT as there is current support contract.
My question is is there a doc for best practice in whats required for disk spaces etc.
I’m guessing that the 2 partition, 1 for ESXi and 1 for the VM machines


Andy
andy.carse at gmail.com



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


More information about the cisco-voip mailing list