[cisco-voip] Installation new phone firmware cop file installation

[Brian Meade]

If you're just upgrading firmware, technically you only have to do it on
your TFTP server and manually update the device defaults.  If the publisher
also happens to be your TFTP server, the device defaults should get updated
automatically.

On Fri, Jan 29, 2016 at 9:55 AM, Reto Gassmann <voip at mrga.ch> wrote:

> Hello Group
>
> I have a UCM cluster 10.5 with 8 servers. TFTP service runs on the
> publisher.
> I now have a new 8831 to install and have to Upgrade the Firmware
> (cmterm-8831-sip.10.3.1SR2EU.k3.cop.sgn) in order to get the 8831 running.
>
> Is it ok to install the cop file on the TFTP Server and restart the TFTP
> after installtion or so I have to install the cop file on every server in
> the cluster?
>
> Tanks a lot and have a great weekend
> Regards Reto
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160129/ba91b930/attachment.html>