[cisco-voip] Hunt Pilot addition to existing hunt list fails with error

[Ryan Huff]

Odd; without digging deep into the traces I would say something may be up with those table indices?

I can't guarantee this will help; you could take a BAT export of all the hunt pilots, hunt lists and line groups. Then delete them all from CCM and BAT them back in.

Thanks,

Ryan

> On Jul 25, 2016, at 7:19 PM, Erick Bergquist <erickbee at gmail.com> wrote:
> 
> Ryan,
> 
> From the system-history log file (didn't do it myself), a fresh
> install of 10.5.1.10000-7 was done then a patch to 10.5.2.11900-3.
> Then DRS restore performed.
> 
> Still at 10.5.2.11900-3.
> 
> 
>> On Mon, Jul 25, 2016 at 4:42 PM, Ryan Huff <ryanhuff at outlook.com> wrote:
>> How was the upgrade performed?
>> 
>> Sent from my iPhone
>> 
>>> On Jul 25, 2016, at 6:34 PM, Erick Bergquist <erickbee at gmail.com> wrote:
>>> 
>>> Anyone seen this on 10.5.2?
>>> 
>>> A client had upgraded from 8.5 to 10.5 and whenever they go to add a
>>> new Hunt Pilot and select existing Hunt List they get this error.
>>> 
>>> "Add failed. The Gateway already has port(s) assigned to a DN."
>>> 
>>> If they delete the hunt list and add it back new, adding hunt pilots works fine.
>>> 
>>> They have many hunt lists with numerous hunt pilots pointing to each.
>>> 
>>> 
>>> Erick
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip