[cisco-voip] DS3 voice delivery?

[Lelio Fulgenzi]

There's this... 

http://www.cisco.com/c/en/us/products/collateral/interfaces-modules/2600-3600-3700-series-t3-e3-network-module/product_data_sheet09186a008010fba2.html 

But in CUCM v9.1, I don't see it as a pull down option in a 3900 series gateway configuration. 

So, not sure it's supported for voice. 

--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Nick Barnett" <nicksbarnett at gmail.com> 
To: "Cisco VoIP Group" <cisco-voip at puck.nether.net> 
Sent: Wednesday, June 8, 2016 9:51:15 AM 
Subject: [cisco-voip] DS3 voice delivery? 

So, we have an old MUX that died. We have to either replace the MUX or use something else. Is it possible to use a DS3 SM on an ISR to terminate the DS3? Right now, we have a DS3 that hits a mux and breaks out to 28 PRIs... those PRIs go into a plethora of VWIC interfaces on a SIP router. Would it be possible to get another module for this router that lets us plug the coax in and skip all of this VWIC/MUX business? 

Thanks, 
Nick 

_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160608/045436b3/attachment.html>