[cisco-voip] CCME & Handset Call forwards

[Quenten Grasso]

Hi Brian,

Configuration of what’s visible in the running config isn’t my issue.

I’m trying to see if we can see at the phone changes made by users using the soft buttons on the phones themselves. eg: If someone picks up the phone and presses the cfwall soft button and sets a diversion at that level that doesn’t seem to appear in the running config.

Regards,
Quenten

From: bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] On Behalf Of Brian Meade
Sent: Thursday, 6 October 2016 2:54 PM
To: Quenten Grasso
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CCME & Handset Call forwards

Actually probably want "show run | i ephone-dn | number | call-forward all"

On Thu, Oct 6, 2016 at 12:53 AM, Brian Meade <bmeade90 at vt.edu<mailto:bmeade90 at vt.edu>> wrote:
show run | i call-forward all

On Thu, Oct 6, 2016 at 12:18 AM, Quenten Grasso <qgrasso at onq.com.au<mailto:qgrasso at onq.com.au>> wrote:
Hi All,

Were running CME w/ 7960 handsets, Is there a way to see which phones if any have call forwards setup by the users at the phone level without visiting every handset?

Regards,
Quenten


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20161006/524f414c/attachment.html>