[cisco-voip] SRST for SIP phones on 4000 Series

Sreekanth sknth.n at gmail.com
Wed Sep 14 03:17:03 EDT 2016


Yes, that is correct. The default mode is traditional SRST.

On 14 September 2016 at 10:59, Evgeny Izetov <eizetov at gmail.com> wrote:

> I believe when you do 'voice register global' the mode is SRST by default.
> So you are not seeing the option of 'mode srst' because you are already in
> that mode.
>
> On Sep 14, 2016 1:03 AM, "Sreekanth" <sknth.n at gmail.com> wrote:
>
>> Mode esrst does not mandate the use of the SRST manager. You can
>> configure mode esrst and then configure the router using the CLI.
>> Esrst provides many more features to the phones over traditional SRST.
>>
>> Are you not getting the 'id network' option under voice register pool for
>> mode esrst?
>>
>> Thanks
>>
>> On Sep 13, 2016 9:34 PM, "Jonathan Charles" <jonvoip at gmail.com> wrote:
>>
>>> Is there a way to deploy conventional SRST on the new 4000 series
>>> routers without the SRST manager?
>>>
>>> It only gives me the option of mode cme or esrst, and when I try to
>>> configure the pool it asks for a mac or device-id...
>>>
>>> Is automatic SRST no longer a thing on the 4000 series?
>>>
>>>
>>>
>>> Jonathan
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160914/06e9d217/attachment.html>


More information about the cisco-voip mailing list