[cisco-voip] SRST for SIP phones on 4000 Series

[Sreekanth]

For Call park you'll need CME-as-SRST to create the park slots.

On 15 September 2016 at 03:35, Jonathan Charles <jonvoip at gmail.com> wrote:

> Right, if I try mode esrst it complains about the network-id under the
> pool... so, can it be enabled (we need the call park)?
>
>
>
> Jonathan
>
> On Wed, Sep 14, 2016 at 12:02 AM, Sreekanth <sknth.n at gmail.com> wrote:
>
>> Mode esrst does not mandate the use of the SRST manager. You can
>> configure mode esrst and then configure the router using the CLI.
>> Esrst provides many more features to the phones over traditional SRST.
>>
>> Are you not getting the 'id network' option under voice register pool for
>> mode esrst?
>>
>> Thanks
>>
>> On Sep 13, 2016 9:34 PM, "Jonathan Charles" <jonvoip at gmail.com> wrote:
>>
>>> Is there a way to deploy conventional SRST on the new 4000 series
>>> routers without the SRST manager?
>>>
>>> It only gives me the option of mode cme or esrst, and when I try to
>>> configure the pool it asks for a mac or device-id...
>>>
>>> Is automatic SRST no longer a thing on the 4000 series?
>>>
>>>
>>>
>>> Jonathan
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160915/27a71c72/attachment.html>