[cisco-voip] dot1x multi domain phones prompt for login

[Hendrix, Bill W. - US]

We are also seeing the phones get disconnected with multi auth enabled and when computers are connected or disconnected from the phone PC port (docking station).

From: Hendrix, Bill W. - US
Sent: Saturday, September 17, 2016 2:00 PM
To: 'cisco-voip at puck.nether.net'
Subject: dot1x multi domain phones prompt for login

Guys,

  We have some ports where we applied multi-domain authentication on ports with Cisco phones connected for phone profiling.  We are using ISE.  However, the phones prompt for username and password.  Do the phones require any dot1x configuration to do this?  Or is this a setting in ISE causing this?

Thanks,
Bill Hendrix
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160918/003286e6/attachment.html>