[cisco-voip] Fax Detect..

[James Buchanan]

I wrote this simplified explanation about eight years ago for SIP. I think
you could probably adapt it for your situation.

Thanks,

James

On Wed, Sep 28, 2016 at 12:15 AM, Jonathan Charles <jonvoip at gmail.com>
wrote:

> So, I am trying to understand this configuration:
>
> http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/voice/
> cube_proto/configuration/15-mt/cube-proto-15-mt-book/voi-
> cube-fax-detection-vxml.html
>
> I want to configure a 2921 with the TCL Fax Offramp (T.37 Fax to Email)...
> however, I need to detect fax on the line before forwarding it to that
> router...
>
> Inbound is a 4451-X via T1-CAS, with a back to back PRI to the 2921 for
> T.37...
>
>
> The plan:
>
> Use Fax Detect on inbound calls and if it is a fax, forward it out the PRI
> to the 2921.
>
> If it is voice, route the call to CUCM.
>
> However, the guide does not appear to explain how to route individual
> numbers, only fax to a range of numbers.
>
> For example, someone calls 8000, and I detect fax, send 8000 down the back
> to back PRI to the 2921. If someone calls 8001, do the same, and for 8002,
> and so on.
>
> Anyone ever configure this?
>
>
>
> Jonathan
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160928/e522fdef/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Setting Up T37 Faxing with SIP Trunks.docx
Type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
Size: 27108 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160928/e522fdef/attachment.docx>