[cisco-voip] one way voice issue

[naresh rathore]

hi,


Setup: there are two sites  (HQ and spoke). Each site have their own internet and connected to each other via ipsec vpn. CUCM and CUC is at HQ site. this is centralized deployment. the internet gateway at HQ site is also acting as a CUBE and there is sip trunk up and running between CUBE and ITSP via internet both HQ and spoke site use the HQ cube to call out (using the same ITSP). now site to site calls are working ok. calls from HQ Phones to ITSP and vice versa (mobile/national etc) are working ok.  incoming calls transferred by HQ phone to spoke site phone also works well. the issue is outgoing call from spoke site, when they make outgoing call, the customer can hear their voice but the spoke site phone user cant hear them. any suggestions??. i have attached the config of both routers.


Regards


Naresh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160930/bc0cbacb/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Hub.txt
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160930/bc0cbacb/attachment.txt>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: Spoke.txt
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160930/bc0cbacb/attachment-0001.txt>