[cisco-voip] 8861 Default Password issue

[Brian Meade]

Seeing this issue too.  It looks like you can set it at "Local Phone Unlock
Password" on the common phone profile but no idea what the default is and
not seeing anything online.

On Thu, Apr 27, 2017 at 9:39 PM, Erick Bergquist <erickbee at gmail.com> wrote:

> CUCM.  Other phones work fine on the same switch port and cable, so
> that has been checked. Normal switchport config.
>
> Unable to check settings or network info on phone itself as it is
> prompting for this password even after factory reset.
>
>
> On Thu, Apr 27, 2017 at 4:34 PM, Anthony Holloway
> <avholloway+cisco-voip at gmail.com> wrote:
> > Kind of funny that I have to ask this on Cisco-VoIP now but are you
> > registering to CUCME, BE4K, Spark or CUCM? If CUCM, via MRA?
> >
> > Also, I've deployed many 8800 and have never seen a password issue like
> > this. Albeit, most of my deployments were with CUCM.
> > On Thu, Apr 27, 2017 at 5:08 PM Erick Bergquist <erickbee at gmail.com>
> wrote:
> >>
> >> Havng issue getting new 8861 registered.
> >>
> >> On the phone it prompts for admin password, but stops at the 4th
> >> character.
> >> Default password is Cisco but we can only enter 4 characters. Doesn't
> >> take anything past 4.
> >>
> >> Anyone seen this before?
> >>
> >> Have done factory reset to with same.
> >>
> >> Erick
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170428/3567e17b/attachment.html>