[cisco-voip] 11.5.1SU2 Can't Add Node

[Brian Meade]

Found a bug related to custom banner size but not much else-
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCub14050

I was using the same exact version for CUCM and CUC with no issues adding
nodes.

On Wed, Aug 9, 2017 at 5:07 PM, Brian Meade <bmeade90 at vt.edu> wrote:

> I just did this successfully a couple weeks ago.  Where does it break?
>
> On Wed, Aug 9, 2017 at 5:04 PM, Matthew Loraditch <MLoraditch@
> heliontechnologies.com> wrote:
>
>> I’ve set, reset, typed different versions of the security password and
>> can’t get nodes added via the factory prebuilt VMs on brand new BE7Ks
>>
>> Is there a known bug or am I crazy?
>>
>> Both CUC and CUCM, albeit I doubt that matters since that part of the
>> code is shared.
>>
>>
>>
>> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>> Network Engineer
>> Direct Voice: 443.541.1518 <(443)%20541-1518>
>>
>> Facebook <https://www.facebook.com/heliontech?ref=hl> | Twitter
>> <https://twitter.com/HelionTech> | LinkedIn
>> <https://www.linkedin.com/company/helion-technologies?trk=top_nav_home>
>> | G+ <https://plus.google.com/+Heliontechnologies/posts>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170809/9a3277f7/attachment.html>