[cisco-voip] 88XX Soft Reset

[Sean E. Knight]

Reset the Phone to the Factory Settings from the Phone Keypad:

Remove power from the phone in one of these ways: Unplug the power adapter. ...

Wait 5 seconds.

Press and hold # and plug the phone back in.

When the Headset and Speaker buttons are lit, release # and enter the following key sequence: 123456789*0#

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jon Fox
Sent: Thursday, August 10, 2017 4:38 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 88XX Soft Reset

Hello All,

Is there soft reset key press sequence on the Cisco 88XX (8841/8851) Devices.

I remember that there was the **#** key press on the 7940/7940 devices. is there a similar on for these newer phone models?

Many thanks


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip