[cisco-voip] FXO hang due to connectivity loss?

[Brian Meade]

I believe it should disconnect on the FXO side but the IP Phone isn't going
to know about it due to the signaling losee.  What behavior are you
seeing?  This is also assuming the FXO side is initiating the disconnect.

On Wed, Dec 13, 2017 at 2:33 AM, Ki Wi <kiwi.voice at gmail.com> wrote:

> Hi Folks,
> If the voice gateway is defined with disconnect tone/ cadence,etc. Should
> a loss of connectivity (SIP signaling between VG and CUCM) cause the FXO
> port not to hang up ?
>
> To me , SIP is peer to peer signaling. It should not affect the voice
> gateway decision for going on-hook when a disconnect tone is detected even
> there is a loss of connectivity to CUCM.
> --
> Regards,
> Ki Wi
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20171213/9db66aed/attachment.html>