[cisco-voip] cisco 8851 problematic

[Ben Amick]

Not saying it's the issue, but I know there was a few really messed up bugs with 10.5 with the firmware that was bundled in. This might be one of those bugs. I'd personally try updating your firmware for 88XX and see if it resolves the issue.

Ben Amick
Telecom Analyst


-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of cisco.voip
Sent: Thursday, February 09, 2017 2:52 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] cisco 8851 problematic

All, i'm on CucM 10.5.2 using cisco 8851 and 8861.
When several phones share the same number, when that line is picked up by one of the phones - all the other phones continue ringing.
Anyone experience this, or have a tshoot method that works,

Thanks,
Ciscovoip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
http://cp.mcafee.com/d/1jWVIp6hAe4zqb3PzyrwVMQsCXCQkmnSkNMV4QsCQkmnSkNPPX9J55BZVYsY-Urhhsd79EVLuWdPp3lpmawECSHIdzrBPpdJnor6TbCQk7kr6zBV_HYCUMMCDRXBQSjhOPP3BNOrfkhjmKCHtdfBgY-F6lK1FJ4SyrLRQkhPz0WXVEVdTdAVPmEBCbdSaY3ivNU6U9GX33VkDa3JsJaBGBPdpb6XiFqFsPmiNsxlK5LE2BCX5u1FfUY3jqpEVd79EVdCBKQGmGncRAIqnjh1qlbld43PPW9EwmzkwvWKPBoSO-rb0Eh0RZM


Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you