[cisco-voip] Jabber Multiple Line Support

[Ben Amick]

Jabber multiple line support does not exist. There is some material I have seen indicating that they finally after all these years have put it on a roadmap, but there is no TBD date as of yet. I’d look at CE 12 at the very earliest, but realisitically I don’t see it happening until 12.5 or later.

Ben Amick
Telecom Analyst

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Frank Arrasmith
Sent: Tuesday, January 17, 2017 12:42 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Jabber Multiple Line Support

Anybody figure out a way for Jabber Mobile (android/iPhone) users to support multiple lines.  I still dont see support on 11.8 and can find nothing Cisco website that shows it on a roadmap for support.  I have tried using Remote destination profile and hunt group configs as a workaround but no joy.  Does anyone have any other workaround that they have tried to get multiple line support?


Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170117/9357981b/attachment.html>