[cisco-voip] Maximum Call Duartion

[Wes Sisk (wsisk)]

That is indeed enforced globally.

There is no way to enforce this natively in CUCM.  If you have any type of firewall or stateful inspection between CUCM and the gateway and using H.323 then you might look at terminating sessions. You might be able to do an automation with EEM on the gateway.

-Wes

On Jan 18, 2017, at 12:00 PM, Asim Mekki Basheer <asim_323 at hotmail.com<mailto:asim_323 at hotmail.com>> wrote:


Hello


 we have CUCM 7.5 connected to outside With E1 PRI is there any way to set Timer to force disconnect outgoing Calls after 30 Minutes , the only way i found is :

CCM go to:

CCMAdmin--> Service --> Service Parameter --> Cisco CallManager -Max call duration

but this will be applied Globally .

Regards


ASIM


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170118/347e9c89/attachment.html>