[cisco-voip] 8841 no power connecting to 4510/4748

[Ryan Huff]

Bill,


Verify that CDP and power inline auto are enabled from the port configuration perspective then from the enable prompt, what is the available/used wattage output of "show power inline"?


Thanks,


Ryan


________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Ryan Huff <ryanhuff at outlook.com>
Sent: Monday, July 10, 2017 1:28 PM
To: Hendrix, Bill W. - US; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 8841 no power connecting to 4510/4748


 it show up  CDP?


Thanks,

Ryan

________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Hendrix, Bill W. - US <george.hendrix at caci.com>
Sent: Monday, July 10, 2017 1:14 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] 8841 no power connecting to 4510/4748


Hey guys,



  I am testing an 8841 on a switch we have, but the switch doesn’t seem to be detecting the phone.



Phone info:

8841 - sip88xx.11-5-1SR1-1.loads



Switch info:



Switch WS-C4510R+E

Supervisor: WS-X45-SUP7-E (03.04.05.SG.151-2.SG5)

WS-X4748-RJ45V+E version 1



I also tested it in a WS-X4148-RJ45V slot, but it also doesn’t work.  Phone powers up fine connecting to a 3560G running 15.0 IOS.





Thanks,



Bill Hendrix


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170710/7dada81d/attachment.html>