[cisco-voip] Configure 3845 router for 911 call.

[Hamu Ebiso]

Hi Everyone,


I need help with this configuration for 911 only.


back ground history, our company bought another company few years back. After about 6 months, the deal fail apart. Within that 6 months employees moved around to different building mixed. When separation started, leaders negotiated so that we still provide professional service to the company that is separating from us for 3 years. In that 2 years, all the assets and employees need to be separated. There are about 50 employee of ours located in the building of the company that is in the process of separating from us.  We are in the process of separated them from this company system but in the same building. We had done all separation form phones to email server and etc. while in the process of separating this employee we have run into issue with 911 if the site loose WAN connection. I was tasked to figure out this. I am just wondering if anyone has done this and help me.


below is the router I am try to configure.

3845 with EVM-HD-8FXS/DID module

ordered Amphenol cable to connect to 110 block

ordered 2 POT Lines


I need help configuring this router for 911 call. I have attached the config I have and I am just wondering if I am missing anything. I haven't don't this kind of configuration before and I need guidance.


Thank you very much!!


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170720/af7170d4/attachment.html>
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: riverview_router_info (004).txt
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170720/af7170d4/attachment.txt>