[cisco-voip] Paging port on VG-310 doesn't go off-hook

[Schlotterer, Tommy]

Do you have the TAMB2 set as a station port?

Thanks

Tommy


Tommy Schlotterer | Systems Engineer - Collaboration
Presidio (NASDAQ: PSDO) | www.presidio.com<http://www.presidio.com>
20 N Saint Clair 3rd Floor, Toledo, OH 43604
D: 419.214.1415 | C: 419.706.0259 | tschlotterer at presidio.com<mailto:tschlotterer at presidio.com>



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Hamu Ebiso
Sent: Monday, June 05, 2017 4:46 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Paging port on VG-310 doesn't go off-hook

Hi Everyone,

Has anyone seen this issue before and know how to fix it. We are Using Bogen's paging system with TAMB2 and some of the port on VG doesn't go off-hook when dialed. When you run show voce port summ, it shows On-hook ringing. Any help will be appreciated.

Thanks
Hamu



Sent from my Sprint Samsung Galaxy S® 6.


This message w/attachments (message) is intended solely for the use of the intended recipient(s) and may contain information that is privileged, confidential or proprietary. If you are not an intended recipient, please notify the sender, and then please delete and destroy all copies and attachments. Please be advised that any review or dissemination of, or the taking of any action in reliance on, the information contained in or attached to this message is prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170605/7ce6fa94/attachment.html>