[cisco-voip] Bogen paging system with TAMB2 and 310 VG.

[Hamu Ebiso]

Yes we are using Bogens and in order to make VG work with Bogens, we used TAMB2. The questions were there are already 3 Zones and the customers are looking for the ways to Tie all 3 Zones to all Zones PAGING ZONE. I was just wondering if someone has ever done that. Using Bogens, TAMB2 and VG 310.

Thanks
Hamu



Sent from my Sprint Samsung Galaxy S® 6.


-------- Original message --------
From: "Norton, Mike" <mikenorton at pwsd76.ab.ca>
Date: 6/12/17 12:01 PM (GMT-06:00)
To: Hamu Ebiso <hebiso2010 at hotmail.com>, cisco-voip at puck.nether.net
Subject: RE: Bogen paging system with TAMB2 and 310 VG.

The TAMB doesn’t do zoning – one zone only. If you need zones, then take a look at the Bogen PCM2000 system instead of the TAMB.

-mn


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Hamu Ebiso
Sent: June 8, 2017 1:22 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Bogen paging system with TAMB2 and 310 VG.

Hi Everyone,

One of our customer was using Avaya phone system with Bogens paging system. We have converted them to cisco systems. Qe have ordered TAMB2 in order to make the their paging system work qith VG 310. They have about 4 Zones and all zones are working fine. Now the customer came back and asking how to create new zone and connect to all other existing zones. I am just wondering if someone has this kind of setup and can share them with me how to set them up.

Thanks
Hamu




Sent from my Sprint Samsung Galaxy S® 6.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170613/f7806887/attachment.html>