[cisco-voip] Overriding admin permissions necessary for jabber-update.xml

[Matthew Loraditch]

A higher version than the URL will not prompt to upgrade. I run the betas on my machine and we have the URL defined. It's if you have lower than check.

Matthew G. Loraditch - CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518

Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Friday, March 24, 2017 11:10 AM
To: Ben Amick <bamick at HumanArc.com>; Cisco VoIP Group <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Overriding admin permissions necessary for jabber-update.xml


Good question - I'll be watching for replies.

In our location, we have some people with admin privileges, some without. We also have some people on centralized desktop management, some with local IT admins helping out. Some people have neither and are responsible for their own machines.

So right now, when we move to the automatic updates, we're going to have to make sure those on centralized desktop management have their versions upgraded first, and then we can update the URL to include the latest copy.

My worry is - if the URL is there from the beginning and the centralized upgrades happen and their version doesn't match the upgrade url , but is higher in version number, will that "pass" the test? Or will the upgrade URL try to downgrade those users?

Ugh.

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ben Amick
Sent: Friday, March 24, 2017 9:37 AM
To: Cisco VoIP Group
Subject: [cisco-voip] Overriding admin permissions necessary for jabber-update.xml

So I'm trying to make it so that all my users are on the newest version of jabber, but other than using GPO or third party software to push the new versions, it seems to be impossible to properly use Jabber-update.xml, thanks to the fact that the update requires admin permissions and 99% of our users don't have those. Is there any way to get the updater to use some implicit permission so users can just update the software without assaulting our helpdesk with hundreds of calls?

Ben Amick
Telecom Analyst


Confidentiality Note: This message is intended for use only by the individual or entity to which it is addressed and may contain information that is privileged, confidential, and exempt from disclosure under applicable law. If the reader of this message is not the intended recipient or the employee or agent responsible for delivering the message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy. Thank you
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170324/92027e87/attachment.html>