[cisco-voip] CCX and NTP

[Scott Voll]

I'm guessing you have a cisco router or two.... Simple put NTP on them,
pointing to 3-5 good NTP sources and then use them company wide.  Works
pretty well for us.  we use Two different Routers with different sources,
then use both routers for all our devices, including Windows.  Haven't had
any issues.

Scott


On Mon, May 8, 2017 at 7:12 AM, Ben Amick <bamick at humanarc.com> wrote:

> What do you guys use for NTP on your CCX hosts? I’ve been informed by TAC
> that “CCX does not support Windows based NTP” so I was thinking about just
> pointing NTP towards my CCM hosts – is that a valid scenario? I figure that
> since CCM is pretty much authoritative on everything for CCX as it is it
> wouldn’t be a problem?
>
>
>
> *Ben Amick*
>
> Telecom Analyst
>
>
>
> Confidentiality Note: This message is intended for use only by the
> individual or entity to which it is addressed and may contain information
> that is privileged, confidential, and exempt from disclosure under
> applicable law. If the reader of this message is not the intended recipient
> or the employee or agent responsible for delivering the message to the
> intended recipient, you are hereby notified that any dissemination,
> distribution or copying of this communication is strictly prohibited. If
> you have received this communication in error, please contact the sender
> immediately and destroy the material in its entirety, whether electronic or
> hard copy. Thank you
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170508/8f3dca0a/attachment.html>