[cisco-voip] Migrating a Cisco 2901 to a Cisco 4321

[Ryan Huff]

T1 PRI commands are substantially different if that is in play.

Sent from my iPhone

On May 12, 2017, at 7:35 AM, Matthew Loraditch <MLoraditch at heliontechnologies.com<mailto:MLoraditch at heliontechnologies.com>> wrote:

The vast majority of commands are the same. Netflow stuff is changed completely if you use that.  Outside of updating interface names, most of our templates just worked.



Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518

Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of norm.nicholson at kitchener.ca<mailto:norm.nicholson at kitchener.ca>
Sent: Friday, May 12, 2017 7:31 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] Migrating a Cisco 2901 to a Cisco 4321


We have a base config we use for building our 2901/11’s . Will this work on the 4321 or do I have to start from scratch.



Thanks




Norm Nicholson
Telecom Analyst
City of Kitchener
(519) 741-2200 x 7000


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170512/849b489a/attachment.html>