[cisco-voip] Migrating a Cisco 2901 to a Cisco 4321

[Anthony Holloway]

Rashmi Patel ( rashmika.patel at zones.com ) - 12:31 PM
Q: Does that mean conference resource will be used from NIM DSP not from
mother board DSP resources
Priority: N/A
Dolan Spitler - 12:57 PM
A: When it comes to IP services (xcoding, conferencing, MTP) The
motherboard DSP can be pooled with the NIM DSPs to increase the DSPfarm
scale

Source: https://communities.cisco.com/docs/DOC-7823 (look for the 4000
event on Oct 16th)

On Fri, May 12, 2017 at 1:17 PM Brian Meade <bmeade90 at vt.edu> wrote:

> My understanding is any dspfarm resources such as conferencing/transcoding
> use the motherboard resources while the ones on the NIM are just for the
> voice ports themselves.
>
> On Fri, May 12, 2017 at 11:51 AM, Jose Colon II <jcolon424 at gmail.com>
> wrote:
>
>> If you will be using DSP's you will need to decided if you will need them
>> on the motherboard or on the T1 NIM. On the motherboard I believe it can
>> only be used for conferencing. You will need them on the NIM for
>> transcoding.
>>
>> On May 12, 2017 6:42 AM, "Ryan Huff" <ryanhuff at outlook.com> wrote:
>>
>>> T1 PRI commands are substantially different if that is in play.
>>>
>>> Sent from my iPhone
>>>
>>> On May 12, 2017, at 7:35 AM, Matthew Loraditch <
>>> MLoraditch at heliontechnologies.com> wrote:
>>>
>>> The vast majority of commands are the same. Netflow stuff is changed
>>> completely if you use that.  Outside of updating interface names, most of
>>> our templates just worked.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>>> Network Engineer
>>> Direct Voice: 443.541.1518 <(443)%20541-1518>
>>>
>>> Facebook <https://www.facebook.com/heliontech?ref=hl> | Twitter
>>> <https://twitter.com/HelionTech> | LinkedIn
>>> <https://www.linkedin.com/company/helion-technologies?trk=top_nav_home>
>>> | G+ <https://plus.google.com/+Heliontechnologies/posts>
>>>
>>>
>>>
>>> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net
>>> <cisco-voip-bounces at puck.nether.net>] *On Behalf Of *
>>> norm.nicholson at kitchener.ca
>>> *Sent:* Friday, May 12, 2017 7:31 AM
>>> *To:* cisco-voip at puck.nether.net
>>> *Subject:* [cisco-voip] Migrating a Cisco 2901 to a Cisco 4321
>>>
>>>
>>>
>>>
>>>
>>> We have a base config we use for building our 2901/11’s . Will this work
>>> on the 4321 or do I have to start from scratch.
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *Norm Nicholson*
>>>
>>> *Telecom Analyst*
>>>
>>> *City of Kitchener*
>>>
>>> *(519) 741-2200 x 7000 <(519)%20741-2200>*
>>>
>>>
>>>
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170512/a1149a91/attachment.html>