[cisco-voip] Identifying incoming Cell numbers - CM v8 and above

[Gary_Bates_Command_Solutions]

Great feedback

Thanks, my client wants to set up a demo so I will do this in the next week.

Gary

-----Original Message-----
From: Gary Parker [mailto:G.J.Parker at lboro.ac.uk] 
Sent: Friday, 19 May 2017 6:07 PM
To: Gary_Bates_Command_Solutions <gbates at commandsolutions.com.au>
Cc: Cisco VoIP List <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Identifying incoming Cell numbers - CM v8 and above


> On 19 May 2017, at 06:07, Gary_Bates_Command_Solutions <gbates at commandsolutions.com.au> wrote:
> 
> My client has a need to save the cell numbers in CM , when a caller calls in from a known cell number , they want to display the persons name .
>  
> 
> Can cell numbers be mapped to a name in CM ?

I believe Florian�s response re. setting up your chose numbers as Remote Destinations would work, and is the only way to do it with just CUCM. The option, I was told back when I looked into the same some years ago, is a TCL script on your voice gateway that alphatags incoming calls form a list.

Useful thread here:

https://supportforums.cisco.com/discussion/11295276/cucm-86x-and-caller-name-incoming-external-calls

Paolo�s scripts were well regarded back then, but not free (thought not expensive, either).


---
/-Gary Parker----------------------------------f--\
|     Unified Communications Service Manager      |
n      Loughborough University, IT Services       |
|     tel:+441509635635 sip:gary at lboro.ac.uk      o
|     http://delphium.lboro.ac.uk/pubkey.txt      |
\r----------------------------------------------d-/