[cisco-voip] CUCM ver 11.5 off hook dial timeout

[Taylor, Matthew]

James,

                You may want to look into the Interdigit Timeout setting on your cluster.
                Ref: https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/6171-interdigit-timeout.html

Thank you,

Matthew Taylor
Network Architect III, IT at Sam - ISS
Sam Houston State University
matthew.taylor at shsu.edu
(936) 294-3955


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Dust
Sent: Friday, November 10, 2017 11:50 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CUCM ver 11.5 off hook dial timeout

Dear all,

We have been asked to look into the possibility of changing the amount of time the system takes to dial an off hook call, after the final digit is dialled on the phone (we have timed this and it is currently around 8 seconds)

Obviously this is a system wide parameter, but can someone please confirm to me which exactly?

Thanks in advance.

J

Consider the environment - Think before you print

The contents of this email are confidential to the intended recipient and may not be disclosed. Although it is believed that this email and any attachments are virus free, it is the responsibility of the recipient to confirm this.

You are advised that urgent, time-sensitive communications should not be sent by email. We hereby give you notice that a delivery receipt does not constitute acknowledgement or receipt by the intended recipient(s).

Details of Charles Stanley group companies and their regulators (where applicable), can be found at this URL http://www.charles-stanley.co.uk/contact-us/disclosure/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20171110/adcc139e/attachment.html>