[cisco-voip] OT: Add move change

[Lelio Fulgenzi]

The question I have surrounding this is do you swap mac addresses or do you do a super copy then delete old one?

There are many apps out there, both Cisco and third party, that are tied to the MAC address of the user’s phone.

We’ve seen swapping MAC addresses out is simple and makes sense for most Cisco apps, but for those third party apps that synchronize databases via AXL, it can cause havoc.

I’m leaning towards updating our MAC process to use supercopy and delete old phones as required in secondary systems.



---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519-824-4120 Ext 56354
lelio at uoguelph.ca
www.uoguelph.ca/ccs
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: Wednesday, September 06, 2017 11:10 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] OT: Add move change

What do other use for add, moves and changes to there environments?

We have a home grown app that is not working well, to notify Telecom group about changes to the phones, new users, configuration changes, etc.

Does anyone know of any can'd or cloud based software?  Are there any that interface with Cisco to automate the process via AXL / SOAP?

Just putting my feelers out to see what is available.

Thanks

Scott

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170906/ef83065c/attachment.html>