[cisco-voip] e164 dialplan conversion

[Bill Talley]

Thanks for the suggestions Bernhard and Florian.

On Thu, Sep 21, 2017 at 9:03 AM, Bernhard Albler <bernhard.albler at gmail.com>
wrote:

> ucm:
> What Florian says is the correct way to do it.
> You can also run a sql update against the numplan table which will do 2
> things:
> 1.)I you typoed you are in for a lot of pain
> 2.)Ucm will load up on change notification (assuming lots of DNs) and
> might come to halt before recovering
>
> ccx:
> Agent DNs in my experience will reflect automatically. Routepoints and CTI
> ports you will need to change manually.
>
>
> Personally i suggest the SQL route as the adrenaline rush is just
> incredible once you realize you made a mistake.
>
> On Thu, Sep 21, 2017 at 3:20 PM, Florian Kroessbacher <
> florian.kroessbacher at gmail.com> wrote:
>
>> Hy out there,
>>
>> throug updateLine this is working
>>
>> use old pattern & partition
>> and set newpattern
>>
>> we have done this for 12000 Lines
>>
>> Am 21. Sep. 2017, 15:13 +0200 schrieb Bill Talley <btalley at gmail.com>:
>>
>> I know there have been some conversations around this in the past, but
>> I’m hoping there are new methods for converting from a 4-digit to full e164
>> dialplan.
>>
>> Is there a way to change dialplan entries on CUCM and UCCX without having
>> to either individually touch each dialplan pattern or without deleting and
>> reimporting/recreating? Has anyone seen or used AXL/SOAP to automate
>> modification of dialplan patterns, or used PCP or some third party product
>> to accomplish this?
>>
>> Thanks for any feedback.
>>
>> Bill
>>
>> Sent from a mobile device with very tiny touchscreen input keys. Please
>> excude my typtos.
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>
> --
> Bernhard Albler, +4369917207384 <+43%20699%2017207384>
> --
> "Was Nachwelt! Wie komm' ich dazu was für die Nachwelt zu tun? Was hat
> denn die Nachwelt für mich getan?"
> --Carl Friedrich Zelter
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20170923/68636d97/attachment.html>