[cisco-voip] 8865 + KEM + Video Calls

[Anthony Holloway]

I have a use case on an 8865 with the KEM, and a Line configured per the
usual setup.  If that line is on the phone itself, I can call it, and get
video to establish.  If I move the line to the KEM, I can call it, but get
audio only.

Is that working as designed, a configuration miss on my part, or a defect?

Unfortunately, I don't have access to many expansion modules (none
actually), so testing different setups/firmware versions is not possible.

Thanks in advanced.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180810/a2d130c8/attachment.html>