[cisco-voip] Auto Attendant setup

[Ahmed Abd EL-Rahman]

Dear Gents,

I have a CUCM 11.5 setup with central and remote sites, each remote site has a local Unity connection providing Auto Attendant functionality and everything is working just fine except for one point which is during WAN outage the SRST on the site voice gateway router is hosting phones and phones can call each others and place outside PSTN calls successfully, but incoming calls to the site through PSTN lines is not hunting in the AA on the local CUC although I have a dial peer for the pilot pointing to the CUC IP address and the IP address of the VGW is added to the list of servers in the ports configurations on CUC.

So I do appreciate if anyone have a working configuration example of such scenario which makes the AA on local CUC works during SRST situation (WAN outage) or at least highlight the needed configurations.


Thanks.



Best Regards

Ahmed Abd EL-Rahman
Senior Network Engineer

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181231/e6db268d/attachment.html>