[cisco-voip] 8821 Cases and Cisco chargers

[Charles Goldsmith]

The last time I messed with this, about 6 months ago, it did not fit the
desktop charger.  Also, audio quality through the case was not good.


On Fri, Jun 1, 2018 at 8:13 AM Jason Aarons (Americas) <
jason.aarons at dimensiondata.com> wrote:

>
>
>
>
> 8821 with Belt Clip putting into Multi Charger?
>
>
>
> Customer bought a lot of CP-HOLSTER-8821= for 8821s
>
> Once I put these belt clips on the phones, will the phone still fit in the
> CP-MCHGR-8821-BUN  or the Desktop Charger ?
>
>
>
> Or do I have to remove the clip/case to charge the 8821?
>
>
>
> Jason Aarons, CCIEx2 No. 38564
>
> Advanced Technology Consultant
>
> Dimension Data
>
> 904-338-3245 <(904)%20338-3245>
>
>
>
>
> This email and all contents are subject to the following disclaimer:
> "http://www.dimensiondata.com/emaildisclaimer"
> <http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180601/8f4b9fa4/attachment.html>