[cisco-voip] Firmware question

[daniele visaggio]

Yes, it is possible.

Go in ssh on the cucm node where the firmware has been installed.

Then do: show version active

it will give you the actual cucm version and the list of all the installed
firmware.

2018-06-13 8:22 GMT+02:00 James Dust <james.dust at charles-stanley.co.uk>:

> On version 11.5 cucm, is it possible once a cop.sgn file has been uploaded
> to view the previous firmware versions that reside on the nodes?
>
> For instance once the cop file is uploaded and has refreshed the device
> defaults page on an SCCP 7970, how would I know what previous 7970
> firmware’s reside on the cluster?
>
> Regards
>
> James
>
> Consider the environment - Think before you print
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and any
> attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL http://www.charles-stanley.co.
> uk/contact-us/disclosure/
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180613/f39af0ee/attachment.html>