[cisco-voip] ISDN T1 voice calls hardware validation

[Ryan Huff]

That correct! I misread! Yeah the shared port adapter T1 should work.


Sent from my iPhone

On May 4, 2018, at 10:36, PF <pucknether at foril.com<mailto:pucknether at foril.com>> wrote:

Hi

Thanks for your help

But there are no NIM slot in the ASR1006 chassis

NIM is for ASR1001-X I think

Pat

----- Original Message -----
From: Ryan Huff<mailto:ryanhuff at outlook.com>
To: PF<mailto:pucknether at foril.com>
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Sent: Friday, May 04, 2018 9:56 AM
Subject: Re: [cisco-voip] ISDN T1 voice calls hardware validation

For isdn voice you’ll need a NIM-8MFT-T1/E1

Sent from my iPhone

On May 4, 2018, at 09:31, PF <pucknether at foril.com<mailto:pucknether at foril.com>> wrote:

Hi

Can someone help us validate if we can use this hardware to receive voice calls from a isdn T1 (23B+D) and send them in SIP to a softswitch and vice-versa

ASR1006
SPA-8XCHT1/E1
SPA-DSP
ASR1000-RP2
ASR1000-ESP40

in short can it be used to build a voip gateway like an audiocode mediant or a patton smartnode

Thanks

Pat

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180504/45bb871b/attachment.html>