[cisco-voip] Speed Dial #30 to URI

[Lelio Fulgenzi]

FYI - I tested using # in the prefix, e.g. *#*, but I couldn’t get it to work in the transform. It wouldn’t recognize # or \#. I didn’t spend any time troubleshooting. Went back to all *’s.

-sent from mobile device-

Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<x-apple-data-detectors://1/0>
519-824-4120 Ext. 56354<tel:519-824-4120;56354> | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

On Nov 12, 2018, at 4:08 PM, Lelio Fulgenzi <lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>> wrote:



Is there an expressway pair in the mix? If so, you can use a transform on the C.

I send RP w/ DN 12345 w/ prefix *** to SIP trunk to C. On C I transform ***12345 to meet at acme.webex.com<mailto:meet at acme.webex.com>.

Works like a charm.

Note: because transforms are the first thing touched in searches and because they’re searched by _all_ calls as far as I can tell (since they don’t have zone information) I use the prefix to make sure no unintentional mixups happen.

-sent from mobile device-

Lelio Fulgenzi, B.A. | Senior Analyst
Computing and Communications Services | University of Guelph
Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON | N1G 2W1<x-apple-data-detectors://1/0>
519-824-4120 Ext. 56354<tel:519-824-4120;56354> | lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>

www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs> | @UofGCCS on Instagram, Twitter and Facebook

[University of Guelph Cornerstone with Improve Life tagline]

On Nov 12, 2018, at 3:57 PM, Jason Aarons (Americas) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:



I’m trying to setup #30 to be name at domain.com<mailto:name at domain.com> in CallManager for a Jabber for Andorid 12.1 client.

Route Patterns and Translation Patterns can’t be SIP URI.  Any other ideas/workarounds?

CallManager 11.5.1SU5

Jason Aarons, CCIEx2 No. 38564
Advanced Technology Consultant
Dimension Data
904-338-3245



This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer"<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181112/53a9f4d7/attachment.html>