[cisco-voip] Customizing called party name/number display for route patterns

Fri Oct 5 15:38:24 EDT 2018

It is a *calling *party transformation css, but if you set the service
parameter 'Apply Transformations on Remote Number' to True, it will be
applied on the called number too.

It just works like this 😀

Il giorno ven 5 ott 2018 alle ore 21:07 Lelio Fulgenzi <lelio at uoguelph.ca>
ha scritto:

> Ciao Daniele,
>
>
>
> Just revisiting this to see how much effort is involved and the impact of
> changing a service parameter.
>
>
>
> You mention “create a calling party transformation pattern”… would I not
> want a “called party transformation pattern” ?
>
>
>
> Calling party A is calling called party B, I want party B’s information to
> be transformed.
>
>
>
> Just wondering before I start digging to deep.
>
>
>
> Lelio
>
>
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | lelio at uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* daniele visaggio <visaggio.daniele at gmail.com>
> *Sent:* Monday, September 24, 2018 5:50 PM
> *To:* Lelio Fulgenzi <lelio at uoguelph.ca>
> *Cc:* cisco-voip voyp list <cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] Customizing called party name/number display
> for route patterns
>
>
>
> mhhh then try to play with Remote Number Calling Party Transformation CSS.
>
>
>
> Create a calling party transformation pattern to change the number from
> "prefix + number" to just "number". Keep it in a relevant partition and
> assign the CSS to Remote Number Calling Party Transformation CSS on device
> page.
>
> Set the advanced service parameter 'Apply Transformations on Remote
> Number' to True. Default is False.
>
>
>
> This is for cosmetic reasons only. Typical use: user dials e.g. 911 and tp
> globalizes to +911 BUT my user doesn't want to see the + sign  on the
> phone's display. So I discard the + with a calling transformation pattern
> applied there.
>
>
>
> Hope it is helpful.
>
>
>
> Il giorno lun 24 set 2018 alle ore 21:44 Lelio Fulgenzi <lelio at uoguelph.ca>
> ha scritto:
>
>
>
> I was afraid you were going to ask that. :(
>
>
>
> It’s not something I’m prepared to change since it’s going to affect
> enterprise wide dialing and how things are displayed.
>
>
>
> I was hoping to be able to do this without modifying that parameter.
>
>
>
> That being said, I did try it on our dev server and rather than keeping
> the original dialed digits, it kept the SIP uri equivalent. Which is
> another problem altogether.
>
>
>
> I might be stuck with prefix showing. :(
>
> *-sent from mobile device-*
>
>
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 <519-824-4120;56354> | lelio at uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
>
> On Sep 24, 2018, at 3:41 PM, daniele visaggio <visaggio.daniele at gmail.com>
> wrote:
>
> Hi,
>
>
>
> did you try setting the *Always Display Original Dialed Number *service
> parameter to True?
>
>
>
>
>
>
>
> Il giorno lun 24 set 2018 alle ore 20:49 Lelio Fulgenzi <lelio at uoguelph.ca>
> ha scritto:
>
>
>
> Hmmm, went through the effort of building a route group and route list and
> adding the prefix digits I need on the route group member configuration of
> the route list.
>
>
>
> But still, the prefix digits appear on the display of the dialing device.
> ☹
>
>
>
> How do I get rid of displaying those prefix digits? I was pretty sure this
> was the way.
>
>
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | lelio at uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* cisco-voip <cisco-voip-bounces at puck.nether.net> *On Behalf Of *Lelio
> Fulgenzi
> *Sent:* Friday, September 21, 2018 11:20 AM
> *To:* Florian Kroessbacher <florian.kroessbacher at gmail.com>; Brian Meade <
> bmeade90 at vt.edu>
> *Cc:* cisco-voip voyp list <cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] Customizing called party name/number display
> for route patterns
>
>
>
>
>
> Hmmm, looks like another programming option.
>
>
>
> I was hoping for a built-in option. ☹
>
>
>
> ---
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 | lelio at uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> [image: University of Guelph Cornerstone with Improve Life tagline]
>
>
>
> *From:* Florian Kroessbacher <florian.kroessbacher at gmail.com>
> *Sent:* Friday, September 21, 2018 10:52 AM
> *To:* Brian Meade <bmeade90 at vt.edu>; Lelio Fulgenzi <lelio at uoguelph.ca>
> *Cc:* cisco-voip voyp list <cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] Customizing called party name/number display
> for route patterns
>
>
>
> Hy out there
>
> what about CURRI if u were on >10
>
> Am 20. Sep. 2018, 23:43 +0200 schrieb Lelio Fulgenzi <lelio at uoguelph.ca>:
>
>
>
> I half want to try the old trick of a CTI route point and use forwarding,
> but not sure I want to intercept that complexity.
>
> *-sent from mobile device-*
>
>
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 <519-824-4120;56354> | lelio at uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
>
> On Sep 20, 2018, at 5:32 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
> For name modification, CUCM doesn't have much.  Probably would need a LUA
> script to update the name in the SIP messaging.
>
>
>
> On Wed, Sep 19, 2018 at 9:33 PM Lelio Fulgenzi <lelio at uoguelph.ca> wrote:
>
>
>
> It’s been a while, and I know I can use route lists and route groups to
> customize called party number display but I can’t recall what my options
> are, if any, to customize the called party name display.
>
>
>
> For example, if I dial 40000 and want only 40000 to continue to display,
> I can do the modifications on the route list/group, ie prefix 999, and
> build appropriate rules on expressway.
>
>
>
> But what if I’d like to display “WebEx Pilot” on the phone when they call
> a particular route pattern?
>
>
>
> I can’t seem to find any option for that.
>
> *-sent from mobile device-*
>
>
>
> *Lelio Fulgenzi, B.A.* | Senior Analyst
>
> Computing and Communications Services | University of Guelph
>
> Room 037 Animal Science & Nutrition Bldg | 50 Stone Rd E | Guelph, ON |
> N1G 2W1
>
> 519-824-4120 Ext. 56354 <519-824-4120;56354> | lelio at uoguelph.ca
>
>
>
> www.uoguelph.ca/ccs | @UofGCCS on Instagram, Twitter and Facebook
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181005/da7648fd/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1297 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181005/da7648fd/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 1297 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181005/da7648fd/attachment-0001.png>