[cisco-voip] 8832 Design Issue?

[Nimloth]

To be honest I won't deploy 8832 in my org as we still struggling to get one up and running since few months. Few TAC/RMA already in progress. 

W dniu 9 paź 2018, 20:35, o 20:35, użytkownik JASON BURWELL <jason.burwell at foundersfcu.com> napisał:
 >Has anyone else using 8832s had a problem with the USB-C cord coming
>unplugged from the phone when people grab it to slide or move the phone
>towards them? Starting to see some issues with this and I only have a
>few deployed so far. Hoping someone has figured out a workaround or
>clip to help retain the cord.
>
>This was never a problem before because all the other Cisco Conf phones
>are not only held in by RJ45 clip but also cord clips made in to the
>base. The 8832 has neither, just USB-C cord that plugs in to the back.
>Thanks! Jason
>
>
>
>------------------------------------------------------------------------
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20181009/1e14eabf/attachment.html>