[cisco-voip] [EXTERNAL] Cisco ATA Devices need reset

[JASON BURWELL]

Yes and frequently. So far, based on my observations, this behavior seems to be fixed in the ATA191. I'm going to be upgrading my remaining 190s for this very reason. And I too have no idea why we have never seen a PoE ATA Device. I know they are not a hot VoIP endpoint but they still have their place and PoE would be nice.

Jason


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lisa Notarianni
Sent: Tuesday, September 18, 2018 3:28 PM
To: cisco-voip voyp list <cisco-voip at puck.nether.net>
Subject: [EXTERNAL] [cisco-voip] Cisco ATA Devices need reset

CAUTION: This email originated outside of Founders Federal Credit Union. Do not click links or open attachments unless you recognize the sender and know the content is safe.
________________________________
Does anyone else out there ever have to do a hard reset on Cisco ATA devices because all of a sudden the ports are not registered in Call Manager?  We have a few buildings this happens often in.  We have to walk to the device and reset it.  This happens for any type of ATA we use; 186, 187 or 190.

Thanks in advance.  Call Manager version 11.5.

Lisa


[Lisa Notarianni Telecom Engineer]

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180918/87a29dfc/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 20842 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20180918/87a29dfc/attachment.png>