[cisco-voip] SetRingTone Wideband

[Brian Meade]

So I confirmed the sample rate should be 16000 Hz as well.

Then exported as Raw (headerless) Signed 16-bit PCM

On Wed, Apr 24, 2019 at 1:25 PM Brian Meade <bmeade90 at vt.edu> wrote:

>  SetRingTone is a bit undocumented in any of the API guides similar to
> setBackground.  They both work but RingTone may not have been updated to
> support wideband files.
>
> I've got the ringtone on CUCM now as well using the file settings in that
> blog but it's playing too fast.
>
> Anyone know if the sample rate needs to be changed from 8000 Hz or any
> other changes for wideband?
>
> On Wed, Apr 24, 2019 at 1:12 PM Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
>> I've never heard of this before, but a quick google search turns up the
>> following page with some detailed info.  Have you already seen this info?
>>
>> http://usecallmanager.nz/ring-list-xml.html
>>
>> Interestingly, this information doesn't seem to be present in the normal
>> Phone API guide.  Is this hidden information, or just documented elsewhere?
>>
>> On Wed, Apr 24, 2019 at 11:38 AM Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> Anyone had any luck using the IP Phone Services API to set a wideband
>>> ringtone? It doesn't seem to like the file size for me even though my files
>>> are smaller than the default wideband ringtones.
>>>
>>> Thanks,
>>> Brian Meade
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190424/47098b14/attachment.html>