[cisco-voip] SetRingTone Wideband

[Anthony Holloway]

Alright, well, I guess that's the end of the road then, huh?

On Thu, Apr 25, 2019 at 3:31 PM Brian Meade <bmeade90 at vt.edu> wrote:

> Thanks for testing Anthony!  You're seeing the same thing I saw in that
> it's only supporting the non-wideband ringtones.
>
> Wideband ringtones don't have any size limitations I've found and also
> don't need to be divisible by 240.  I downloaded the wideband ringtones
> from CUCM and confirmed their sizes/samples and such to confirm that.
>
> I can make a very long/sizable wideband ringtone, put it in the
> RingList-wb.xml file and upload it to TFTP and it works fine.  Seems like
> the limitation is just around the SetRingTone command only working with
> legacy ringtone parameters.
>
> On Thu, Apr 25, 2019 at 3:14 PM Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
>> I made a little progress.
>>
>> *Python*
>> >>> import requests
>> >>> phone = 'my phone IP here'
>> >>> creds = ('my username', 'my password')
>> >>> xml = {'XML': '<setRingTone><ringTone>
>> https://tftpserver.company.com:6972/NewRingtone.rwb
>> </ringTone></setRingTone>'}
>> >>> resp = requests.post('http://{}/CGI/Execute'.format(phone),
>> auth=creds, data=xml)
>> >>> resp
>> <Response [200]>
>> >>> resp.text
>> u'<?xml version="1.0"
>> encoding="utf-8"?>\r\n<CiscoIPPhoneResponse>\r\n<ResponseItem URL=""
>> Data="Success" Status="0" />\r\n</CiscoIPPhoneResponse>\r\n'
>>
>> At first I got:
>>
>> >>> resp
>> <Response [400]>
>> >>> resp.text
>> u'<?xml version="1.0" encoding="utf-8"?>\r\n<errorResponse>\r\n<type>
>> Unsupported Operation</type> \r\n<data> Personalization is disabled</data>
>> \r\n</errorResponse>\r\n'
>>
>> After I enabled that, I then got:
>>
>> >>> resp
>> <Response [400]>
>> >>> resp.text
>> u'<?xml version="1.0" encoding="utf-8"?>\r\n<errorResponse>\r\n<type>
>> InvalidResource</type> \r\n<data>  Ring Tone Too Large:
>> https://tftpserver.company.com:6972/ NewRingtone.rwb  Size is
>> 264828</data> \r\n</errorResponse>\r\n'
>>
>> Then after I cut the ringtone in half, I got this:
>>
>>
>> >>> resp
>> <Response [400]>
>> >>> resp.text
>> u'<?xml version="1.0" encoding="utf-8"?>\r\n<errorResponse>\r\n<type>
>> InvalidResource</type> \r\n<data>  Invalid Ring Tone: Number of Ring
>> samples in the ring not evenly divisible by 240:
>> https://tftpserver.company.com:6972/ NewRingtone.rwb</data>
>> \r\n</errorResponse>\r\n'
>>
>> So, I used the following as a supplement to the previously linked site,
>> so that I could figure out this 240 sample thing:
>>
>> https://www.netcraftsmen.com/uc-toolkit-using-audacity-for-cucm-ring-tones/
>>
>>
>> My phone (8851 on 12.5(1)SR2) still plays the default Sunrise ringtone,
>> and I don't see where the new ringtone comes into play.  Perhaps my
>> successes will help you move the needle a little further?
>>
>> On Thu, Apr 25, 2019 at 12:35 PM Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>> I've got it working using the RingList-wb.xml globally, but still can't
>>> get it to work via API.  It seems like SetRingTone was just never updated
>>> to allow for wideband ringtones.
>>>
>>> On Thu, Apr 25, 2019 at 10:37 AM Anthony Holloway <
>>> avholloway+cisco-voip at gmail.com> wrote:
>>>
>>>> Do you have it working now then?
>>>>
>>>> On Wed, Apr 24, 2019 at 12:42 PM Brian Meade <bmeade90 at vt.edu> wrote:
>>>>
>>>>> So I confirmed the sample rate should be 16000 Hz as well.
>>>>>
>>>>> Then exported as Raw (headerless) Signed 16-bit PCM
>>>>>
>>>>> On Wed, Apr 24, 2019 at 1:25 PM Brian Meade <bmeade90 at vt.edu> wrote:
>>>>>
>>>>>>  SetRingTone is a bit undocumented in any of the API guides similar
>>>>>> to setBackground.  They both work but RingTone may not have been updated to
>>>>>> support wideband files.
>>>>>>
>>>>>> I've got the ringtone on CUCM now as well using the file settings in
>>>>>> that blog but it's playing too fast.
>>>>>>
>>>>>> Anyone know if the sample rate needs to be changed from 8000 Hz or
>>>>>> any other changes for wideband?
>>>>>>
>>>>>> On Wed, Apr 24, 2019 at 1:12 PM Anthony Holloway <
>>>>>> avholloway+cisco-voip at gmail.com> wrote:
>>>>>>
>>>>>>> I've never heard of this before, but a quick google search turns up
>>>>>>> the following page with some detailed info.  Have you already seen this
>>>>>>> info?
>>>>>>>
>>>>>>> http://usecallmanager.nz/ring-list-xml.html
>>>>>>>
>>>>>>> Interestingly, this information doesn't seem to be present in the
>>>>>>> normal Phone API guide.  Is this hidden information, or just documented
>>>>>>> elsewhere?
>>>>>>>
>>>>>>> On Wed, Apr 24, 2019 at 11:38 AM Brian Meade <bmeade90 at vt.edu>
>>>>>>> wrote:
>>>>>>>
>>>>>>>> Anyone had any luck using the IP Phone Services API to set a
>>>>>>>> wideband ringtone? It doesn't seem to like the file size for me even though
>>>>>>>> my files are smaller than the default wideband ringtones.
>>>>>>>>
>>>>>>>> Thanks,
>>>>>>>> Brian Meade
>>>>>>>> _______________________________________________
>>>>>>>> cisco-voip mailing list
>>>>>>>> cisco-voip at puck.nether.net
>>>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>>>
>>>>>>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190425/9f1997ec/attachment.html>