[cisco-voip] Offline Analog Call Recording

Fri Dec 13 07:58:56 EST 2019

Hello,

The last time I had to record analog, I had to force the call out of the
analog gateway to another analog gateway (basically) and capture the data
in between. I used ZOOM CallREC to capture the recording. That said, with
the new media forking available in the gateways, you might be able to
hairpin that call through a VoIP dial peer to get it to fork. I've done
that with a PRI before and sent the forked stream to MediaSense. Not ideal,
but worked. I've attached that config for your reference.

Thanks,

James

On Thu, Dec 12, 2019 at 2:33 PM Pawlowski, Adam <ajp26 at buffalo.edu> wrote:

> Hello all,
>
> I'm trying to find a solution that will support not only BiB call
> recording for IP Phones and Jabber, of which there are many, but, also
> analog lines. However, we're not looking to record them from a VG. These
> lines are used as a backup during maintenance to the VoIP system, or when
> the facility is isolated from the network or VoIP is otherwise down. We'd
> like to record the audio from them and either spool it to be sent to the
> recording server later, or, less ideally, the recording server would be a
> physical server located at that site so that our network interruptions
> aren't their network interruptions.
>
> I can find any number of solutions that will work for the BiB devices,
> but, not this analog scenario. I've seen some options from Revcord and
> HigherGround which sort of can accomplish this but are larger software
> suites.
>
> Anyone aware of anything that can do this?
>
> Regards,
>
>
>
> Adam Pawlowski
>
> SUNYAB
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20191213/c50f90b4/attachment.htm>
-------------- next part --------------
!
version 15.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BE6K_Router
!
boot-start-marker
boot-end-marker
!
aqm-register-fnf
!
card type t1 0 0
logging buffered 51200 warnings
!
no aaa new-model
network-clock-participate wic 0 
network-clock-select 3 T1 0/0/0
!
!
!
!
ip dhcp excluded-address 10.10.10.1
!
ip dhcp pool ccp-pool
 import all
 network 10.10.10.0 255.255.255.248
 default-router 10.10.10.1 
 lease 0 2
!
!
!
ip domain name dsot.local
ip name-server 192.168.221.154
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
isdn switch-type primary-4ess
!
!
!
!
voice service voip
 address-hiding
 mode border-element 
 allow-connections sip to sip
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
 sip
!
!
!
!
voice translation-rule 1
 rule 1 /\(.*\)/ /888\1/
!
voice translation-rule 2
 rule 2 /888\(.*\)/ /\1/
!
voice translation-rule 3
 rule 1 /3\(.*\)/ /\1/
!
!
voice translation-profile OutboundIntl
 translate called 3
!
voice translation-profile prefix
 translate called 1
!
voice translation-profile strip
 translate called 2
!
!
!
media profile recorder 10000
 media-recording 20
!
media class 3
 recorder profile 10000
!
license udi pid CISCO2901/K9 sn FJC1912A1VV
hw-module pvdm 0/0
!
hw-module pvdm 0/1
!
!
!
redundancy
!
!
controller T1 0/0/0
 cablelength long 0db
 pri-group timeslots 1-24
 description Linefromadtran
!
!
!
!
!
interface Loopback0
 ip address 1.1.1.1 255.255.255.255
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 description $ETH-LAN$$ETH-SW-LAUNCH$$INTF-INFO-GE 0/0$
 ip address 10.10.10.1 255.255.255.248
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 description Trunk to POE switch
 no ip address
 duplex auto
 speed auto
!
interface GigabitEthernet0/1.1
 description Data VLAN sub-interface
 encapsulation dot1Q 1 native
 ip address 192.168.221.253 255.255.255.0
!
interface GigabitEthernet0/1.75
 description BE6K Voice VLAN sub-interface
 encapsulation dot1Q 75
 ip address 192.168.122.254 255.255.255.0
!
interface GigabitEthernet0/1.100
 description uc500 voice vlan 100
 encapsulation dot1Q 100
 ip address 192.168.222.254 255.255.255.0
!
interface Serial0/0/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 no cdp enable
!
ip forward-protocol nd
!
ip http server
ip http authentication local
ip http secure-server
ip http timeout-policy idle 60 life 86400 requests 10000
!
ip route 0.0.0.0 0.0.0.0 192.168.221.254
ip route 192.168.221.70 255.255.255.255 192.168.221.254
ip route 192.168.221.117 255.255.255.255 192.168.221.254
ip route 192.168.221.154 255.255.255.255 192.168.221.254
!
!
!
access-list 23 permit 10.10.10.0 0.0.0.7
!
control-plane
!
!
voice-port 0/0/0:23
 !
 !
 !
 !
!
mgcp
mgcp call-agent 192.168.122.201 2427 service-type mgcp version 0.1
mgcp rtp unreachable timeout 1000 action notify
mgcp modem passthrough voip mode nse
mgcp package-capability rtp-package
mgcp package-capability sst-package
mgcp package-capability pre-package
no mgcp package-capability res-package
no mgcp timer receive-rtcp
mgcp sdp simple
mgcp fax t38 inhibit
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
ccm-manager music-on-hold
!
ccm-manager mgcp
no ccm-manager fax protocol cisco
ccm-manager config server 192.168.122.201  
ccm-manager config
!
dial-peer voice 999000 pots
 service mgcpapp
!
dial-peer voice 20 voip
 description Dial-peer pointing to the recording server
 destination-pattern 99999
 session protocol sipv2
 session target ipv4:192.168.122.207
 session transport tcp
 voice-class sip options-keepalive
 no vad
!
dial-peer voice 1 pots
 translation-profile incoming prefix
 incoming called-number .
 direct-inward-dial
 port 0/0/0:23
!
dial-peer voice 2 voip
 description To loop incoming PSTN calls back to itself
 destination-pattern 888.
 session protocol sipv2
 session target ipv4:1.1.1.1
 dtmf-relay rtp-nte h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 3 voip
 description Incoming DP for the looped call
 translation-profile incoming strip
 session protocol sipv2
 incoming called-number 888.
 dtmf-relay rtp-nte h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 4 voip
 description outgoing DP for the looped call to PBX
 destination-pattern [1245678]...
 session protocol sipv2
 session target ipv4:192.168.122.201
 media-class 3
 dtmf-relay rtp-nte h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 5 voip
 description Incoming DP for the outgoing PSTN calls
 translation-profile incoming prefix
 session protocol sipv2
 incoming called-number 3.
 dtmf-relay rtp-nte h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 6 voip
 description To loop outgoing PSTN calls
 destination-pattern 8883.
 session protocol sipv2
 session target ipv4:1.1.1.1
 media-class 3
 dtmf-relay rtp-nte h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 7 voip
 description Incoming DP for the looped call
 translation-profile incoming strip
 session protocol sipv2
 incoming called-number 8883.
 dtmf-relay rtp-nte h245-alphanumeric
 codec g711ulaw
 no vad
!
dial-peer voice 8 pots
 destination-pattern 3[2-9]......$
 port 0/0/0:23
 forward-digits 7
!
dial-peer voice 9 pots
 destination-pattern 3[2-9]..[2-9]......$
 port 0/0/0:23
 forward-digits 10
!
dial-peer voice 10 pots
 destination-pattern 3[2-9]11$
 port 0/0/0:23
 forward-digits 3
!
dial-peer voice 11 pots
 destination-pattern 31[2-9]..[2-9]......
 port 0/0/0:23
 forward-digits 11
!
dial-peer voice 12 pots
 destination-pattern 3011T
 port 0/0/0:23
 prefix 011011
!

!
!