[cisco-voip] Cisco UCCX Play ToD and Calling number Prompt

[Anthony Holloway]

Are you willing to swap out your generator step for the phone number, and
just use this method?

Play Prompt (--Triggering Contact--, N[calling_number.replace("+", "")])

On Tue, Feb 26, 2019 at 9:10 AM Wagner, Fredrich <
fredrich.wagner at centurylink.com> wrote:

> Thank you, I actually got it earlier with the prompt generator,
> interestingly, the generator does not work with +e164 numbers, so If I were
> to call from a DiD:
>
> +15554443321
>
> It would not play anything
>
> But, if I call form an internal, non-did:
>
> 1001001001
>
> It plays the extension accordingly.
>
>
>
>
>
> *From:* Anthony Holloway <avholloway+cisco-voip at gmail.com>
> *Sent:* Tuesday, February 26, 2019 9:51 AM
> *To:* Wagner, Fredrich <fredrich.wagner at centurylink.com>
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Cisco UCCX Play ToD and Calling number Prompt
>
>
>
> For ToD, the simplest method is to use the Create Generated Prompt step.
> So, you would store the current time like this: Set time_now = T[now], and
> then you would use the generator step to output to a Prompt variable, for
> which you would play with the Play Prompt step.
>
>
>
> For calling number, the simplest method is to use the Play Prompt step to
> Spell the number, if the number is in your preferred format, like so: Play
> Prompt (--Triggering Contact--, S[calling_number]), where you previously
> stored the calling number from the Get Call Contact Info step.  If the
> number is not in your preferred format, then you might need to manipulate
> it, before spelling it back.
>
>
>
> TIP: S[] is called a prompt literal, and it says each number, one at a
> time.  Contrast that with N[], which says the cardinal number, and #[],
> which  says the ordinal number.  E.g., Saying 13 as "one three" vs thirteen
> vs thirteenth
>
>
>
> Let me know if that helps you get what you need.  Else, just post back.
>
>
>
> On Mon, Feb 25, 2019 at 10:24 AM Wagner, Fredrich <
> fredrich.wagner at centurylink.com> wrote:
>
> Hello, I am looking to build a simple script that will play a prompt,
> telling the caller the  time of day, and what their calling number is.
>
>
>
> Any ideas pointing me in the right direction would be greatly appreciated.
>
>
>
>
>
> Thank you!
>
>
>
>
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> This communication is the property of CenturyLink and may contain
> confidential or privileged information. Unauthorized use of this
> communication is strictly prohibited and may be unlawful. If you have
> received this communication in error, please immediately notify the sender
> by reply e-mail and destroy all copies of the communication and any
> attachments.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190226/a8a392b4/attachment.html>