[cisco-voip] 8865s and MRA CUCM registration failover issue

Benjamin Turner benmturner at hotmail.com
Wed Oct 30 15:00:40 EDT 2019


Are the ExpresswaysC/E clustered?

Get Outlook for Android<https://aka.ms/ghei36>

________________________________
From: cisco-voip <cisco-voip-bounces at puck.nether.net> on behalf of Erick Bergquist <erickbee at gmail.com>
Sent: Wednesday, October 30, 2019 2:56:50 PM
To: Brian Meade <bmeade90 at vt.edu>
Cc: voip puck <cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] 8865s and MRA CUCM registration failover issue

Following up on this, still working to figure this out and have been
working with TAC.

Does anyone know if the 8865s when using MRA use only the first 2
servers in UCM group or will also the third server if present?

On the 8865 phone web page it shows all 3 servers from UCM group.

On the phone information page on phone itself, it shows the Active
Server and Stand-by Server only.

When we make the first server unreachable (CCM1) the 8865 over MRA
fails to second server CCM2 fine and the phone information screen
shows CCM1 as Active Server and the Stand-by Server field is empty.
The web page of phone shows all 3 servers still with CCM2 as Active.
When we make CCM2 unreachable the phone just spins and never goes to
the third server over MRA.  Phones on-premise use the third server
fine.

I can not find any documentation on this and so far no one seems to
really have an answer if 88xx phones over MRA will use the third
server in UCM group.

Thanks.

On Mon, Oct 14, 2019 at 12:25 PM Erick Bergquist <erickbee at gmail.com> wrote:
>
> Thanks, I've seen that bug before (and another cisco doc) and that bug
> says fixed in 8.11.x which we are on.
>
> All 3 CUCMs are in our SRV records and show active on the Expressway side.
>
> On Mon, Oct 14, 2019 at 12:04 PM Brian Meade <bmeade90 at vt.edu> wrote:
> >
> > You're may be hitting this limitation-  https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvj49486
> >
> >
> > If not, are all 3 CUCM servers in the _cisco-uds SRV record and resolvable by the Expressway-C?
> >
> > On Mon, Oct 14, 2019 at 11:47 AM Erick Bergquist <erickbee at gmail.com> wrote:
> >>
> >> Has anyone seen where 8865 model phones don't register over MRA  in
> >> the UCM group if the some servers are not reachable?
> >>
> >> 8865s with 12.5.1 SR3 firmware
> >> 12.5.1 SU1 CUCM
> >>
> >> 2 expressway pairs
> >>
> >> UCM group order (same as service group),
> >>
> >> CCM1
> >> CCM2
> >> CCM3
> >>
> >> When CCM1 and CCM2 are unreachable the MRA 8865 phone just spins at registering.
> >> Once CCM1 or CCM2 become reachable, the phone comes backs up.
> >>
> >> DX 70's and DX 80's register fine when CCM3 is only available over MRA.
> >>
> >>
> >> Thanks,
> >> Erick
> >> _______________________________________________
> >> cisco-voip mailing list
> >> cisco-voip at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20191030/80db0268/attachment.htm>


More information about the cisco-voip mailing list