[cisco-voip] Setup

[Charles Goldsmith]

Well, if your setup has 1 site, and all phone are setup the same, it is a
simple process, you can even copy a phone.  However, anything more complex
than that, and you could get bad results, like if someone dialed emergency
services and it went out the wrong location.

If you have already setup all of the call routing details, then you know
what is needed to setup a phone.

On Tue, Sep 3, 2019 at 12:09 PM John Huston <fentonguy2003 at yahoo.com> wrote:

> I have already done that which is why I am asking a question here for
> training. Thank you for the prompt reply.
>
>
>
>
> On Tuesday, September 3, 2019, 12:07:53 PM CDT, Charles Goldsmith <
> w at woka.us> wrote:
>
>
> John, the settings in your system are very specific to your site and
> setup.  If you are not familiar with it, I'd advise you to reach out to
> your partner / VAR for assistance.
>
>
> On Tue, Sep 3, 2019 at 11:59 AM John Huston via cisco-voip <
> cisco-voip at puck.nether.net> wrote:
>
> Hello,
>
> Is there a location where I can find some slides on how to setup a phone
> in an existing system from start to finish?  The Route Groups, Route Lists
> and Route Patterns are already setup.
>
> Thank you in advance for your help.
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20190903/c4ce1533/attachment.htm>