[cisco-voip] Java and custom UCCX

[Anthony Holloway]

I see your post on the developer forums, and as as here, didn't get much in
the way of a solution.  Did you ever end up moving past your hurdles and
successfully solve this one?

On Thu, Mar 26, 2020 at 6:58 AM Pawlowski, Adam <ajp26 at buffalo.edu> wrote:

> I shunted in a new oracle jdbc jar to replace the existing one (and thus
> losing the entire database connection pooling framework that CCX has)
> because the in built one is archaic and doesn’t work with oracle encryption
> or modern rev, then wrote some java code to handle simple queries.
>
>
>
> It works until it doesn’t want to – SU installs or system reboots
> sometimes the jar doesn’t load for … no given reason at all, then you have
> to reboot to bring it up hopefully.
>
>
>
> As bad as it sounds if you’re stuck on that system would it be more
> reasonable to write a broker/proxy that can shuttle these requests for you?
>
>
>
> Adam
>
>
>
> *From:* cisco-voip <cisco-voip-bounces at puck.nether.net> *On Behalf Of *Anthony
> Holloway
> *Sent:* Thursday, March 26, 2020 2:32 AM
> *To:* Tim Smith <tim.smith at enject.com.au>
> *Cc:* voyp list, cisco-voip (cisco-voip at puck.nether.net) <
> cisco-voip at puck.nether.net>
> *Subject:* Re: [cisco-voip] Java and custom UCCX
>
>
>
> I did a Java thing....once
> <https://community.cisco.com/t5/contact-center/how-to-using-a-custom-java-class-in-uccx-5-x-soap-example/td-p/1029442>....never
> again man.  never again.
>
>
>
> I would recommend posting in the UCCX community forum
> <https://community.cisco.com/t5/contact-center/bd-p/5926-discussions-contact-center>,
> as there are at least 2 or 3 regulars who I believe could help with this
> type of thing.
>
>
>
> And, it's less active, but the developer section for UCCX
> <https://community.cisco.com/t5/contact-center/bd-p/j-disc-dev-contact-center>
> might be worth a shot too.
>
>
>
> Last but not least, the dude's over at Cloverhound seem to love
> challenges, as they've competed in like a dozen Engineering Death match
> episodes.  Maybe ping them on Twitter <https://twitter.com/cloverhound>.
>
>
>
> Good luck.  I look forward to hearing the outcome.
>
>
>
> On Wed, Mar 25, 2020 at 6:09 PM Tim Smith <tim.smith at enject.com.au> wrote:
>
> Big guys, I should be more specific :)
>
>
>
> Exact challenge
>
>    -  UCCX 10.0 with JRE 1.6
>    - Does not support TLS 1.2
>    - We need to make a REST call with OAUTH and TLS 1.2
>    - Using bouncy castle to try and get around the JRE TLS limitation
>
> Should also note we have working on 11.x with JRE 7 and no bouncy castle.
> (Which sounds less fun, but it works better :)
>
>
>
> Cheers,
>
>
>
> Tim
>
>
>
> Get Outlook for iOS <https://aka.ms/o0ukef>
> ------------------------------
>
> *From:* Tim Smith
> *Sent:* Thursday, March 26, 2020 10:00:07 AM
> *To:* voyp list, cisco-voip (cisco-voip at puck.nether.net) <
> cisco-voip at puck.nether.net>
> *Subject:* Java and custom UCCX
>
>
>
> Hi guys,
>
>
>
> I’m not sure if we are supposed to do this.
>
> I am stuck on a Java and UCCX issue.
>
>
>
> We are trying to run a custom class, and we are having issues with the
> loading of the class.
>
> It seems very Cisco specific as we can run it anywhere else compiled and
> ran on same JDK/JRE etc.
>
>
>
> We’ve put a lot of hours in so far and tried a lot of things, but at a bit
> of a roadblock.
>
>
>
> I know there are some great UCCX people on here. Wondering if anyone might
> be up for a quick chat on Webex Teams.
>
>
>
> Cheers,
>
>
>
> Tim
>
>
>
> Get Outlook for iOS <https://aka.ms/o0ukef>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200407/167e6734/attachment.htm>