[cisco-voip] sip 404 not found for incoming calls

[NateCCIE]

Have you been resting the trunk in cucm after each of your changes?

Sent from my iPhone

> On Apr 30, 2020, at 7:08 AM, naresh rathore <nareh84 at hotmail.com> wrote:
> 
> 
> hi
> 
> 
> Pls find the attached ccsip messages and cube config. i will send voice ccapi inout config tomorrow. outgoing call works fine but cucm respond with 404 message during incoming call attempt
> 
> 
> Regards
> 
> 
> 
> From: Ryan Huff <ryanhuff at outlook.com>
> Sent: Thursday, April 30, 2020 10:50 PM
> To: naresh rathore <nareh84 at hotmail.com>
> Cc: Amit Kumar <amit3.kum at gmail.com>; cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
> Subject: Re: [cisco-voip] sip 404 not found for incoming calls
>  
> Naresh,
> 
> Any chance you could send a ccsip messages and a voice ccapi inout debug from a failed inbound call?
> 
> Sent from my iPhone
> 
>>> On Apr 30, 2020, at 06:28, naresh rathore <nareh84 at hotmail.com> wrote:
>>> 
>> 
>> hi
>> 
>> 
>> I tried both, via translation pattern or directly pointing a particular number to phone but still the same result.
>> 
>> Regards
>> 
>> 
>> From: Amit Kumar <amit3.kum at gmail.com>
>> Sent: Thursday, April 30, 2020 6:41 PM
>> To: naresh rathore <nareh84 at hotmail.com>
>> Cc: James B <james.buchanan2 at gmail.com>; cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
>> Subject: Re: [cisco-voip] sip 404 not found for incoming calls
>>  
>> Are you having a dn, exact to called number, of you are doing some translation, then make sure route pattern incoming css shoold have access to xlate pt. Nd xlate css shoud have access to phones pt. 
>> 
>> On Thu, Apr 30, 2020, 2:02 PM naresh rathore <nareh84 at hotmail.com> wrote:
>> hi,
>> 
>> 
>> Thanks for the reply. 
>> 
>> 
>> pls see following snapshot and attached gateway config. outgoing dialpeer (200,201) is currently matching correctly to cucm (for incoming call)
>> 
>> 
>> 
>> 
>> 
>> 
>> 
>> Regards
>> 
>> Naray
>> From: James B <james.buchanan2 at gmail.com>
>> Sent: Thursday, April 30, 2020 5:39 PM
>> To: naresh rathore <nareh84 at hotmail.com>; cisco-voip at puck.nether.net <cisco-voip at puck.nether.net>
>> Subject: RE: [cisco-voip] sip 404 not found for incoming calls
>>  
>> Hello,
>>  
>> Can you send your gateway configuration and a screenshot of your CUCM trunk configuration? That’d give us more to go off of.
>>  
>> Thanks,
>>  
>> James
>>  
>>  
>>  
>> From: naresh rathore
>> Sent: 30 April 2020 08:36
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] sip 404 not found for incoming calls
>>  
>> hi,
>>  
>>  
>>  
>> i have cucm version 12.0. outgoing call is working without any issue. but incoming call is failing. the call request is received by cucm but its responding with 404 not found. i checked CSS and also pointed call directly to ip phone using significant digits and incoming css but still the same issue. also sip uri have called number. not sure why 404 not found msg is sent by cucm to cube.
>>  
>>  
>> Regards
>>  
>> Naray
>>  
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://nam10.safelinks.protection.outlook.com/?url=https%3A%2F%2Fpuck.nether.net%2Fmailman%2Flistinfo%2Fcisco-voip&data=02%7C01%7C%7C01617e1596284dca88b408d7ecf129b1%7C84df9e7fe9f640afb435aaaaaaaaaaaa%7C1%7C0%7C637238392830439677&sdata=%2BBocnzBxzrQDeGY8H4FLLCSBtxWvNCm8i%2FY8km%2F3t7o%3D&reserved=0
> 
> <detailed ccsip messages.txt>
> <gatewayconfig.txt>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200430/0bdb54ab/attachment.htm>