[cisco-voip] Join Webex Button on TOuch 10

[Brian Meade]

The other non-advertised thing is that Webex Teams and Jabber both join
Webex meetings as video calls as well so you're also stuck with that 200
limit if joining from those.

This should be changing with the Unified Client though.

On Thu, Feb 20, 2020 at 9:06 AM Lelio Fulgenzi <lelio at uoguelph.ca> wrote:

> Just as an aside... this uses up a “video endpoint” peg count. So, at
> most, 200 attendants this way.
>
> Sent from my iPhone
>
> On Feb 20, 2020, at 7:36 AM, Pawlowski, Adam <ajp26 at buffalo.edu> wrote:
>
> I set up a dial pattern for this in our UCM, to match the dialing prefix
> set in Webex teams, which currently goes to our site.
>
>
>
> It’s not that great from audio only devices because the meet IVR just
> answers with “enter your meeting number” and then is silent.
>
>
>
> However – you can *start* a meeting this way very easily as you join as a
> video device as far as Webex is concerned.
>
>
>
> *From:* cisco-voip <cisco-voip-bounces at puck.nether.net> *On Behalf Of *Brian
> Meade
> *Sent:* Wednesday, February 19, 2020 9:29 PM
> *To:* JASON BURWELL <JASON.BURWELL at foundersfcu.com>
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Join Webex Button on TOuch 10
>
>
>
> You can dial any 9-digit meeting number now like 123456789 at webex.com.
> Webex changed to make these non-site specific.  So it's easy to make an
> Extron/Crestron interface to enter a 9-digit meeting number than have it
> just add @webex.com and dial.
>
>
>
> The other thing you can do is just have a button for meet at webex.com which
> prompts you to enter the 9-digit meeting number via DTMF.
>
>
>
> On Tue, Feb 18, 2020 at 4:12 PM JASON BURWELL via cisco-voip <
> cisco-voip at puck.nether.net> wrote:
>
> I noticed with CE9.10 they have now added a “Join Webex” button that
> appears on the Touch 10 home screen that allows direct calling to a webex
> meeting without dialing the entire URI. This is a great feature but now I’m
> trying to figure out if anyone is having luck integrating this Quick
> connect to webex meeting feature in to room systems that are Crestron
> controlled and do not have a Touch 10 present. Sure would be nice to be
> able to be able to have this functionality from the Crestron control as
> well. My A/V vendor says they “are working on it” so it could be a while.
> Anyone had luck with this?
>
>
>
> Thanks Jason
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200220/a581df81/attachment.htm>