[cisco-voip] RedSky SIP Trunk

[Matthew Loraditch]

Has anyone done this? Surprisingly they don't provide a bunch of guidance here. I'm so used to carriers and other vendors being very very specific about how to setup their trunks.

I was planning on doing them directly in CUCM as that seemed simpler, but would appreciate any input.



Matthew Loraditch
Sr. Network Engineer
p: 443.541.1518
w: www.heliontechnologies.com | e: MLoraditch at heliontechnologies.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200331/2c450d3d/attachment.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image245941.png
Type: image/png
Size: 9409 bytes
Desc: image245941.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200331/2c450d3d/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image203754.png
Type: image/png
Size: 431 bytes
Desc: image203754.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200331/2c450d3d/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image109763.png
Type: image/png
Size: 561 bytes
Desc: image109763.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200331/2c450d3d/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image999820.png
Type: image/png
Size: 444 bytes
Desc: image999820.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20200331/2c450d3d/attachment-0003.png>